When activating sodium chlorite or MMS water purification drops, an acidic substance must be added in order to form chlorine dioxide in order to provide pathogen killing ability. Sodium chlorite can be added directly to water to provide purification from heavy metals and pathogens. One drop of sodium chlorite added to one gallon of water will remove most heavy metals and you will be able to drink in 10 minutes. To provide faster purification, activate with one of the substances mentioned below.
Substances Used to Activate MMS Water Purification Drops
- Lemon Juice
- Lime Juice
- Unfiltered Apple Cider Vinegar
- Citric Acid
Add 5 drops of lemon juice/lime juice/unfiltered apple cider vinegar/citric acid solution for EACH drop of MMS.
For example: 5 drops of MMS requires 25 drops of lemon juice.
This will form a 10% solution.
After mixing MMS and 10% solution is mixed together, wait three minutes to activate before use.
Apple Cider vinegar is beneficial to use an activator for its yeast-killing benefits and its non-allergenic properties. There are a small percentage of people who are allergic to citric acid. If you experience nausea with any activator other than apple cider vinegar, wait 10 minutes and drink water with 1 teaspoon of baking soda added. You can also eat an apple for relief, and try apple cider vinegar instead for an activator.
How to Make Citric Acid Solution
10% Solution 5:1 Ratio
Mix 1 tablespoons of citric acid powder with 9 tablespoons of distilled water and store in refrigerator. This will form 4 ounces of a 10% solution. When using this mixture, always add 5 drops for each drop of MMS water purification drops.
50% Solution 1:1 Ratio
Mix 6 tablespoons of citric acid powder and 6 tablespoons of distilled water and store in refrigerator. This will form 4 ounces of a 50% solution. When using this mixture, always add 1 drop for each drop of MMS water purification drops. NOTE: To mix larger quantities of 50% citric acid solution, mix equal measurements of citric acid powder and distilled water.
How to Activate MMS with 50% Citric Acid Solution
Mix 1 drop of 50% citric acid solution for each drop of MMS. For example, 5 drops of MMS would require 5 drops of 50% citric acid solution. After MMS and 50% citric acid solution is mixed together, wait 15 seconds to activate before use. Once a particular solution is prepared, don’t forget to label your container to avoid confusion if you have mixed both solutions. Experiment with all the above-mentioned types of activators to discover which you like the best. Using apple cider vinegar has not only the benefit of chlorine dioxide, but also the benefit of killing yeast, or candida, at the same time.
Once chlorine dioxide is formed, the color of the mixture may turn dark yellow or light brown, this is normal. It means that the two substances have combined to form chlorine dioxide. The mixture may also smell strong, this is another indicator that the mixture has been activated. Do not inhale deeply.
Very Important: Do not add vitamin C to your chlorine dioxide mixture, it will de-activate the pathogen fighting power.
These are the four substances that can be used to activate MMS water purification drops, or sodium chlorite. Please see the below-mentioned websites for additional information. Sodium chlorite has been used for water purification in water treatment facilities and by campers/hikers/outdoorists to form potable drinking water for several years. When sodium chlorite and an acid are combined, a new substance is formed called chlorine dioxide, which is a powerful destroyer of pathogens. It kills parasites, cryptosporiudium, giardia, oocysts, bacteria, viruses and heavy metals.
Source by Stephanie T